There are more and more cyber attacks from the Internet. Due to security concerns, the network administrator may not want to open the VPN service for the whole day but want to open the service only during working hours. Vigor3910/2962 supports scheduling the VPN connection since firmware version 3.9.6. We will demonstrate how to configure the router to achieve the purpose in this article.
Supported Models/ Firmware versions:
-2927/2865 4.3.1 (* fw is not available yet)
1. Go Applications>>Schedule. Ensure the Current System Uptime of the router is same to the current Time, then enable profiles.
2. Create two profiles for off-work hours. (We would create two schedule profiles because the Vigor Router would remain End Time at 23:59 if you set a duration time which goes through the next day.)
3. Go VPN and Remote Access >> Remote Dial-in User to create a VPN profile.
Now this VPN connection only can be connected during working hours.
When the VPN user tries to dial in during the non-working hours, we will see the message “XXX is schedule off now.” in the VPN Syslog.
If the VPN user still can be connected after setting up a schedule profile, please check the items below:
Was this helpful?
Thank you for your feedback :)
Sorry about that. Contact Support if you need further assistance, or leave us some comments below to help us improve.