VigorACS 2 uses the TR-069 protocol to communicate with the device, and the configuration profile is composed of TR-069 parameters name and the value. In the past, we need to lean the TR-069 parameter of a specific function, but since version 2.4.0, we add the feature "sampling from online device" to make it easier to create the global parameter profile. This article is going to demonstrate how to create a Global Parameter profile and apply it to the CPE and the network. Here we take the wireless settings for example.
Note: Sampling from online device is only available for the DrayOS Router and VigorAP.
To use the sampling feature, you will need to register a sample device to your ACS server first. We will import the required configuration from this device and add it into the profile.
Now: ACS will apply the settings to the device when receiving the next inform from it.
Scheduled: ACS will only apply the configuration change between the start time and end time.
Trigger Profile: Select the Schedule profile created from Maintenance > Schedule Profile. ACS will apply the changes when receives the first inform from CPE between the period set in the schedule profile.
Provisioning: Check the box to add the parameter to the global profile.
Keep: Check the box to add the parameter into Keep Parameter List and avoid someone changes the setting from the local side.
Go to the Provisioning > Network, select the global profile for a network or devices. Then click Save.
ACS server should apply the changes in the specified period. From the Monitoring > Log page, select the Set Parameter for log type, and we will see the status of a profile applied.
Was this helpful?
Thank you for your feedback :)
Sorry about that. Contact Support if you need further assistance, or leave us some comments below to help us improve.