Vigor Router provides multiple IP subnets, which allows different groups of LAN clients to use a different range of IP address. More IP subnets are available when VLAN (Virtual LAN) is configured to partition the LAN clients. This article introduces how to use multiple subnets with port-based VLAN.
1. Suppose we would like to use three LAN subnets on the router. At LAN >> VLAN Configuration page, and check Enable set the VLAN as follows:
2. At the page of LAN >> General Setup, check the "Enable" box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router.
3. You can edit the detailed IP and DHCP settings by entering Details Page.
With the above configuration, the device connecting to LAN Port 1 will belongs to LAN1, and get an IP address in the 192.168.1.0/24 subnet; The device connecting to LAN Port 2 will belongs to LAN2, and get an IP address of 192.168.2.0/24 subnet; The device connecting to LAN Port 3 and Port 4 will belong to LAN3 and get an IP address in 192.168.3.0/24 subnet.
1. Edit the default 802.1Q VLAN ID 10 via LAN >> Switch >> 802.1Q VLANas follows:
2. Add a new 802.1Q VLAN via LAN >> Switch >> 802.1Q VLAN, edit the profile as follows:
3. Add two more 802.1Q VLAN groups for VLAN ID 12 and VLAN ID 13 with the same steps. After completing the above configurations, there will be 4 VLAN groups.
4. Add a new LAN profile with VLAN ID 11 via LAN >> General Setup page, edit the profile as follows:
5. Similarly, add two more LAN profiles for VLAN ID 12 and VLAN ID 13. After completing the above configurations, the router will have 4 LAN profiles. When a PC connects to LAN Port 1, it will obtain IP 192.168.1.x; when connects to LAN Port 2, it will obtain IP 192.168.2.x; LAN Port 3 for IP 192.168.3.x; and LAN Port 4 for IP 192.168.4.x. By default, the PCs connecting to different LAN ports cannot access each other because they belong to different VLANs.
Published On: 2016-05-12
Was this helpful?
Thank you for your feedback :)
Sorry about that. Contact Support if you need further assistance, or leave us some comments below to help us improve.