產品中心 ADSL2/2+ Router Vigor2800G
         友善列印      
                 





相關連結
線上展示 ( 詳細設定 請洽技術服務 )
功能列表
產品規格表
產品應用
Datasheet
快速安裝手冊
使用手冊
R&TTE Certification
下載檔案
購買地點
  
1. ADSL2 / 2+ Compliance
  • ANSI T1.413 Issue2
  • ITU-T G.992.1 G.dmt
  • ITU-T G.992.2 G.lite
  • ITU-T G.992.3 ADSL2 G.dmt.bit
  • ITU-T G.992.4 ADSL2 G.lite.bis
  • ITU-T G.992.5 ADSL2+
2. ATM Protocols
  • RFC2684 MPoA ( Multiple Protocol over AAL5)
  • RFC2516 PPPoE ( PPP over Ethernet )
  • RFC2364 PPPoA ( PPP over AAL5)
  • PPPoE pass-through from LAN / WAN
  • Transparent bridge for MPoA
3. Wireless Access Point
  • IEEE802.11b ( 2.4 ~ 2.497 GHz )
  • IEEE802.11g ( 2.4 ~ 2.4835GHz )
  • Wireless Transmit Power : 20dBm
  • Super G 108Mbps
  • Wireless client list
  • Access point discovery
  • WDS ( Wireless Distribution System )
  • Wireless LAN isolation
  • Wireless rate-control
  • 64/128-bit WEP
  • WPA/WPA2 ( IEEE802.11i )
  • 802.1x authentication with RADIUS client
  • VPN over WLAN
  • Hidden SSID
  • Mac address access control
  • Wireless VLAN
4. VPN
  • Up to 32 VPN tunnels
  • Protocol : PPTP, IPSec, L2TP, L2TP over IPSec
  • Encryption : AES, MPPE and hardware-based DES/3DES
  • Authentication : MD5, SHA-1
  • IKE Authentication : pare-shared key and digital signature ( X.509 )
  • LAN-to-LAN, Teleworker-to-LAN
  • DHCP over IPSec
  • NAT-Traversal ( NAT-T )
  • Dead Peer Detection ( DPD )
  • VPN pass-through
5. Firewall
  • IM blocking
  • P2P blocking
  • Multi-NAT, DMZ Host, Port-Redirection / Open Port
  • Rule-based IP packet filter
  • MAC address filter
  • SPI ( Stateful Packet Inspection )
  • DoS / DDoS protection
  • IP address anti-spoofing
  • E-Mail alert and logging via syslog
6. QoS
  • Guarantee bandwidth for VoIP
  • Class-based bandwidth guarantee by user-defined traffic categories
  • Support four priority levels
  • DiffServ Code Point classifying
7. USB
8. Network feature
  • DHCP Client / relay / server
  • Dyanmic DNS
  • SNTP client
  • Call scheduling
  • RADIUS client
  • DNS cache / proxy
  • UPnP
  • Routing protocol :
    • Static routing
    • RIP V2
9. Content Filter
  • URL keyword blocking ( Whitelsit and Blocklist )
  • Java applet, cookies, Active X, compressed, executable, multimedia file blocking
  • Web content filter ( Power by SurfControl )
  • Time schedule control
10. Network Management
  • Web-based user interface ( HTTP / HTTPS )
  • Quick Start Wizard
  • CLI ( Command Line Interface , Telent / SSH* )
  • Administration access control
  • Configuration backup / restore
  • Built - in diagnostic function
  • Firmware upgrade via TFTP / FTP
  • Logging via syslog
  • SNMP management MIB-II

最後修改日期 : 18 June 2008