|
|
產品中心
Switch
VigorSwitch G2080 |
|
|
1. Standard Compliance
- IEEE 802.3x Flow Control Capability
- IEEE 802.1q VLAN
- IEEE 802.1p QoS
|
2. Performance
- Switching Capacity
- 8 Gigabit Ethernet Ports with
Non-blocking Wise Speed Performance
- 8 K MAC Addresses
- 144KB On-chip Frame Buffer
- Supports Jumbo Frame, Up to
8K
- Broadcast / Multicast Storm
Suppression
- Port Mirroring
- VLAN
- Port-base VLAN
- IEEE 802.1q Tag-base VLAN, Up
to 256 Active VLANs
- Q-in-Q is An Efficient Method
for Enabling Subscriber Aggregation
- VSM ( Virtual Stacking Management
)
- Up to 16 Switches Can be Managed
via Single IP
- Virtual Stacking, No Extra Stacking
Hardware and Physical Central
Wiring Closet are Needed
- QoS
- Supports Layer 4 TCP/UDP Port
and ToS Classification
- Supports IEEE 802.1p QoS with
Two-Level Priority Queue
- Supports Priority in a Q-in-Q
Tag
- Bandwidth Control
- Support Bandwidth Rating Per
Port Ingress and Egress Rate Limit
1000Mbps with 1Mbps
|
3. Protocol
- LACP
- Port Trunking with 4 Trunking
Groups
- Up to 8 Ports for Each Group
- GVRP / GARP
- IEEE 802.1q with GVRP / GARP
- Multicasting
- Supports IGMP Snooping Including
Active and Passive Modes
- STP / RSTP
- IEEE 802.1d / IEEE 802.1w /
IEEE 802.1s
|
4. Network Security
- IEEE 802.1x Access Control
- Management Access Policy Control
|
5. SNMPV1, V2C Network Management
- RFC 1213 MIB ( MIB-II)
- Interface MIB
- Address Translation MIB
- IP MIB
- ICMP MIB
- TCP MIB
- UDP MIB
- SNMP MIB
- RFC 1757 RMON MIB
- Statistics Group 1
- History Group 2
- Alarm Group 3
- Event Group 9
- RFC 1493 Bridge MIB
- RFC 1643 Ethernet MIB
- Enterprise MIB
|
6. Specifications
- 8 x RJ-45 10/100/1000 Mbps Ports
- 2 x Dual Media Ports
- 1 x Console Port
- 1 x Restart Button
- Voltage : 100-240 V
- Consumption : 20W
- Dimensions : 132.7 x 217 x 44 mm
- Weight : 1kg
|
7. Cable and Maximum Length for SFP*
- 1000Base-SX M-M
- Up to 220/275/500/550m, Which
Depends on Multi-MOde Fiber Type
- 1000Base-LX SC S-M
- Single-Mode Fiber, Up to 10/30/50Km
- 1000Base-LX WDM SC S-M
- Single-mode Single Fiber. Bidi
20Km
*Vigor Switch
G2080 not including SFP module.
|
|
|
|
VigorSwitch
G2080 產品規格表
|
| Specifications |
8 x RJ-45 10/100/1000
Mbps Ports |
| 2 x Dual Media
Ports |
| 1 x Console Port |
| 1 x Restart Button |
| Standard
Compliance |
IEEE 802.3x
Flow Control Capability |
| IEEE 802.1q
VLAN |
| IEEE 802.1p
QoS |
| Performance |
Switching Capacity
|
8 Gigabit Ethernet
Ports with Non-blocking Wise Speed Performance |
| 8 K MAC Addresses |
| 144KB On-chip Frame Buffer |
| Supports Jumbo Frame, Up
to 8K |
| Broadcast / Multicast Storm
Suppression |
| Port Mirroring |
| VLAN |
Port-base VLAN |
| IEEE 802.1q Tag-base VLAN,
Up to 256 Active VLANs |
| Q-in-Q is An Efficient Method
for Enabling Subscriber Aggregation |
| VSM
( Virtual Stacking Management ) |
Up to 16 Switches Can be
Managed via Single IP |
| Virtual Stacking, No Extra
Stacking Hardware and Physical Central
Wiring Closet are Needed |
| QoS |
Supports Layer 4 TCP/UDP
Port and ToS Classification |
| Supports IEEE 802.1p QoS
with Two-Level Priority Queue |
| Supports Priority in a Q-in-Q
Tag |
| Bandwidth Control |
Support Bandwidth Rating
Per Port Ingress and Egress Rate Limit
1000Mbps with 1Mbps |
| Protocol
|
LACP
|
Port Trunking with 4 Trunking
Groups |
| Up to 8 Ports for Each Group |
| GVRP / GARP |
IEEE 802.1q with GVRP /
GARP |
| Multicasting
|
Supports IGMP Snooping Including
Active and Passive Modes |
| STP / RSTP |
IEEE 802.1d / IEEE 802.1w
/ IEEE 802.1s |
| Network
Security |
IEEE 802.1x
Access Control |
| Management Access
Policy Control |
| SNMPV1,
V2C Network Management |
RFC
1213 MIB ( MIB-II) |
Interface MIB |
| Address Translation MIB |
| IP MIB |
| ICMP MIB |
| TCP MIB |
| UDP MIB |
| SNMP MIB |
| RFC
1757 RMON MIB |
Statistics Group 1 |
| History Group 2 |
| Alarm Group 3 |
| Event Group 9 |
| RFC 1493 Bridge
MIB |
| RFC 1643 Ethernet
MIB |
| Enterprise MIB |
| Operation Voltage |
100-240 V |
| Consumption |
20W |
| Weight |
1kg |
| Dimensions |
132.7 x 217
x 44 mm |
| Warranty |
1 Year Limited |
| Cable
and Maximum Length for SFP |
1000Base-SX M-M
|
Up to 220/275/500/550m, Which
Depends on Multi-MOde Fiber Type |
| 1000Base-LX SC
S-M |
Single-Mode Fiber, Up to
10/30/50Km |
| 1000Base-LX
WDM SC S-M |
Single-mode Single Fiber.
Bidi 20Km |
*Vigor Switch G2080 not
including SFP module. |
|
|
The DrayTek VigorSwitch G2080 manageable Layer 2
switch offers 8 10/100/1000Base-T Gigabit Ethernet
ports and 2 SFP combo ports, and which supports SNMP,
Web-based and CLI management interface. Designed ideally
for workgroups and long range remote located network
applications, it incorporates features such as QoS,
MAC Filtering Policy, Port Mirroring, VLAN and full
Layer 2 protocol. With these advanced features, the
DrayTek VigorSwitch G2080 is an ideal solution for
expanding your Gigabit network.
|
| VLAN
Features |
VigorSwith G2080 offers benefits for both security
and performance with the VLAN function. VLAN can isolate
traffic among different clients. In addition, it provides
good security in network application. Within the same
VLAN broadcast domain, the limited broadcast traffic
can enhance performance of the switch. Moreover, advanced
technique, 802.1Q-in-Q, is provided and deployed within
VLAN feature.
|
|
| Layer
4 Classification |
VigorSwitch G2080 supports higher layer classification
/ prioritization to activate the enhanced QoS for
real-time applications with the information coming
from Layer 2 to Layer 4.
|
| Supervisor
Monitoring Network supported by Port Mirroring |
Supervisor Monitoring Network supported
by Port Mirroring. The mechanism of port mirroring
can track errors in network or detect abnormal packet
transmission but not break down the data flow for
it will duplicate data from specified port to another
port.
|
| Flexible
Fiber Connection via Dual Medial Ports |
Port 7 and port 8 (dual medial ports) are used for
flexible fiber connection. For short, medium or long
distance fiber backbone attachment, users can install
optional transceiver modules in these two ports. The
usage of SFP will disable corresponding built-in 10/100/1000Base-T
connections.
圖 3 . 2 Dual Media
for Flexible Fiber Connection Application |
|
| Noiseless
VigorSwitch G2080 |
To fit the request of working on limited small space
for SOHO users, the noiseless VigorSwitch G2080 is
important to and suitable for them.
|
| Port
Trunk for Balancing Traffic Load |
Port trunk is useful for switch-to-switch cascading
which can offer high full-duplex speed. To create
multi-link load-sharing trunk in network, the Gigabit
ports can be grouped together to reach the purpose.
Users can combine up to 4 Gigabit ports for the bandwidth
up to 8 Gbps. Moreover, VigorSwitch can support up
to 4 trunking groups.
|
| 802.1x
Access Control Improve Network Security |
802.1x features provide authentication for each
network access for users. Besides, to control the
number of stations for each port, the port security
feature allows users to limit the number of MAC address
per port. Users can define static MAC address for
each port to ensure the access of registered machines.
With these two features, users can establish an access
mechanism with identifying user and machine, and control
the number of access stations easily.
|
| 802.1d
Compatible & 802.1w Rapid Spanning Tree |
Users can configure VigorSwitch with a redundant
backup bridge path for the mission critical environment
with multiple switches supporting STP. Hence, the
transmission and reception of packets can be assured
in the event of any failover switch on the network.
|
| Broadcast
/ Multicast Storm Control |
Broadcast/multicast storm control is adapted by
VigorSwitch to restrict the excess traffic by avoiding
broadcast/multicast flooding in the network. Threshold
values are available for each port to control the
rate limit. Additionally, if the count exceeds the
configured upper threshold, the transmitted packets
would be discarded.
|
|
|