|
|
產品中心
Dual WAN Security Router
Vigor2950G |
|
|
|
|
1. Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD ( Bandwidth on Demand )
- WAN Connection Fail-over
|
2. Wireless Access Point
- IEEE802.11b/g Compliant
- Super G™ 108Mbps
- Wireless Client List
- Access Point Discovery
- WDS ( Wireless Distribution System
)
- Wireless LAN Isolation
- Wireless Rae Control
- 64/128-bit WEP
- WPA / WPA2
- 802.1X Authentication with RADIUS
Client
- Hidden SSID
- MAC Address Access Control
- Wireless VLAN
|
3. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
- L2TP*
|
4. Firewall
- SPI ( Stateful Packet Inspection
)
- CSM (Content Security Management)
for IM / P2P Application
- Multi-NAT, DMZ Host, Port-Redirection
/ Open Port
- Policy-Based IP Packet Filter
- DoS / DDoS Protection
- IP Address Anti-Spoofing
- E-Mail Alert and logging via Syslog
- Bind IP to MAC Address
|
5. VPN
- Up to 200 VPN Tunnels
- Protocol : PPTP, IPSec, L2TP, L2TP
over IPSec
- Encryption : AES, MPPE and Hardware-Based
DES / 3DES
- Authentication : Hardware-Based
MD5, SHA-1
- IKE Authentication : Pre-shared
Key and Digital Signature ( X.509
)
- LAN-to-LAN, Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection ( DPD )
- VPN Pass-Through
- VPN Backup
- VPN Load-balance
|
6. Bandwidth Management
- Class-based Bandwidth Guarantee
by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for Each Direction
(Inbound / Outbound)
- Bandwidth Borrowed
- Bandwidth / Session Limitation
|
7. Network Management
- Web-Based User Interface (HTTP /
HTTPS)
- Quick Start Wizard
- CLI (Command Line Interface) / Telnet
/ SSH*
- Administration Access Control
- Configuration Backup/Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP / FTP
/ TR-069
- Logging via Syslog
- SNMP Management with MIB-II
- TR-069
|
8. Content Filter
- URL Keyword Blocking ( White list
and Black list )
- Java Applet, Cookies, Active X,
Compressed / Executable / Multimedia
File Blocking
- Web Content Filter ( SurfControl
)
- Time Schedule Control
|
9. Network Features
- DHCP Client / Relay / Server
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache / Proxy
- UPnP
- Port-Based VLAN
- Routing Protocol:
|
*
Firmware Upgradeable |
|
|
Vigor2950G
產品規格表 |
| Hardware
Interface |
LAN |
Maximum 5-port 10/100/1000
Base-TX Switch |
| WAN |
2-port 10/100 Base-TX
Ethernet |
| WLAN |
IEEE802.11b/g with
Super G™ |
| Dual-WAN |
Outbound Policy-Based
Load-Balance |
| BoD ( Bandwidth on
Demand ) |
| WAN Connection Fail-over |
| Wireless Access
Point |
IEEE802.11b/g Compliant |
| Super G™ 108Mbps |
| Wireless Client List |
| Access Point Discovery |
| WDS ( Wireless Distribution
System ) |
| Wireless LAN Isolation |
| Wireless Rae Control |
| 64/128-bit WEP |
| WPA / WPA2 |
| 802.1X Authentication with
RADIUS Client |
| Hidden SSID |
| MAC Address Access Control |
| Wireless VLAN |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| BPA |
| L2TP* |
| Firewall |
SPI ( Stateful Packet
Inspection ) |
| CSM (Content Security
Management) for IM / P2P Application |
| Multi-NAT, DMZ Host, Port-Redirection
/ Open Port |
| Policy-Based IP Packet
Filter |
| DoS/DDoS Protection |
| IP Address Anti-Spoofing |
| E-Mail Alert and Logging
via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 200 VPN Tunnels |
| Protocol |
PPTP , IPSec , L2TP,
L2TP over IPSec |
| Encryption |
MPPE |
| Hardware-Based AES / DES / 3DES
|
| DHCP over IPSec |
| IKE Authentication : Pre-shared
Key and Digital Signature (X.509) |
| NAT-Traversal ( NAT-T ) |
| Dead Peer Detection ( DPD
) |
| VPN Pass-Through |
| LAN to LAN / Teleworker
to LAN |
| VPN Backup |
| VPN Load-balance |
| Bandwidth
Management |
Class-Based Bandwidth
Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for Each
Direction ( Inbound / Outbound ) |
| Bandwidth Borrowed |
| Bandwidth/Session Limitation |
| Network Management
|
Web-Based User Interface
( HTTP / HTTPS ) |
| Quick Start Wizard |
| CLI (Command Line Interface)
/ Telnet / SSH* |
| Administration Access Control |
| Configuration Backup /
Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP
/ FTP / TR-069 |
| Logging via Syslog |
| SNMP Management with MIB-II |
| TR-069 |
| Content Filter
|
URL Keyword Blocking (White
list and Black list) |
| Java Applet, Cookies,
Active X, Compressed / Executable / Multimedia
File Blocking |
| Web Content Filter (SurfControl
) |
| Time Schedule Control |
| Network Features
|
DHCP Client / Relay /
Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache/Proxy |
| UPnP |
| Port-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Temperature |
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% ( non-condensing
) |
| Max. Power |
22 Watt |
| Dimension |
L273 * W166 * H44.6 (
mm ) |
| Power |
AC 100~240V, 50/60Hz |
*
Firmware Upgradeable |
|
The Vigor2950 is a broadband router with dual-WAN
interface It provides policy-based load-balance, fail-over
and BoD ( Bandwidth on Demand ) , and also integrates
IP layer QoS, NAT session/bandwidth management to
help users control and allocate the bandwidth on networks.
|
| Wireless
Application
|
| With high-performance Super G™ wireless connectivity,
the router enables the wireless access rate up to
108Mbps. Besides the encrypton methods of WEP/WPA/WPA2
and MAC address control, it also offers wireless LAN
isolation, Wireless VLAN and 802.1X authentication.
WDS ( Wireless Distribution System ) can help users
extend wireless coverage easily. Moreover, the wireless
rate control can adjust the connection rate of each
wireless station. |
|
| Dual
WAN Application
|
| It allows users to access Internet and combine the
bandwidth of the dual WAN to speed up the transmission
through the network. Each WAN port can connect to
different ISPs, Even if the ISPs use different technology
to provide telecommunication service (such as DSL,
Cable modem, etc.). If any connection problem occurred
on one of the ISP connections, all the traffic will
be guided and switched to the normal communication
port for proper operation. |
|
| Firewall
& VPN Application |
By adopting hardware-based VPN platforms, hardware encryption
of AES/DES/3DES and hardware key hash of SHA-1/MD5, the
router increases the VPN performance greatly and offers
several protocols ( such as IPSec/PPTP/L2TP ) with support
for up to 200 VPN tunnels.
The object-oriented design used in SPI ( Stateful Packet
Inspection ) firewall allows users to set firewall policies
with ease. CSM ( Content Security Management ) enables users
to control and manage IM (Instant Messenger) and P2P (Peer
to Peer) application more efficiently than before. By the
way, Dos/DDoS prevention and URL/Web content filter strengthen
the security outside and inside the network.
圖 4 . Smart VPN Client / Firewall
應用圖 |
|
|