|
|
產品中心
Dual WAN Security Router
Vigor2930n |
|
|
|
|
1. Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD ( Bandwidth on Demand )
- WAN Connection Fail-over
|
2. Wireless Access Point
- IEEE 802.11n Compliant
- Wireless Client List
- Access Point Discovery
- WDS ( Wireless Distribution System )
- Wireless LAN Isolation
- Wireless Rate-Control
- 64 / 128-bit WEP
- WPA / WPA2
- 802.1X Authentication with RADIUS Client
*
- Hidden SSID
- Multiple SSIDs
- MAC Address Access Control
|
3. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- L2TP *
- BPA
|
4. Firewall
- CSM ( Content Security Management ) for
IM / P2P Applications
- Multi-NAT, DMZ Host , Port-Redirection
and Open Port
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection )
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
|
5. VPN
- Up to 100 VPN Tunnels
- Protocol : PPTP, IPSec , L2TP , L2TP over
IPSec
- Encryption : MPPE and Hardware-Based AES
/ DES / 3DES
- Authentication : Hardware-Based MD5 ,
SHA-1
- IKE Authentication : Pre-shared Key and
Digital Signature ( X.509 )
- LAN-to-LAN , Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection ( DPD )
- VPN Pass-Through
|
6. Bandwidth Management
- QoS :
- Guarantee Bandwidth for VoIP
- Class-based Bandwidth Guarantee by
User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for each Direction
( Inbound / Outbound )
- Bandwidth Borrowed
- Bandwidth / Session Limitation
|
7. Network Management
- Web-Based User Interface ( HTTP / HTTPS
)
- Quick Start Wizard
- CLI ( Command Line Interface, Telnet /
SSH *
)
- Administration Access Control
- Configuration Backup / Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP
- Logging via Syslog
- SNMP Management MIB-II
|
8. Content Filter
- URL Keyword Blocking ( White List and
Black List )
- Java Applet , Cookies , Active X , Compressed
, Executable , Multimedia File Blocking
- Web Content Filter ( SurfControl )
- Time Schedule Control
|
9. Network Features
- DHCP Client / Relay / Server
- Port-based VLAN
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache / Proxy
- UPnP
- Routing Protocol :
|
*
Firmware Upgradeable |
|
Vigor2930n
產品規格表 |
| Hardware
Interface |
LAN |
4-port 10/100
Base-TX Switch |
| WAN |
2-port 10/100 Base-TX
Ethernet |
| WLAN |
IEEE 802.11n |
| Dual-WAN |
Outbound Policy-Based
Load-Balance |
| BoD ( Bandwidth on
Demand ) |
| WAN Connection Fail-over |
| Wireless Access
Point |
IEEE 802.11n Compliant |
| Wireless Client List |
| Access Point Discovery |
| WDS ( Wireless Distribution
System ) |
| Wireless LAN Isolation |
| Wireless Rate-Control |
| 64 / 128-bit WEP |
| WPA / WPA2 |
| 802.1X Authentication with
RADIUS Client *
|
| Hidden SSID |
| Multiple SSIDs |
| MAC Address Access Control |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| L2TP *
|
| BPA |
| Firewall |
CSM ( Content Security
Management ) for IM / P2P Applications |
| Multi-NAT, DMZ Host ,
Port-Redirection and Open Port |
| Policy-Based Firewall |
| MAC Address Filter |
| SPI ( Stateful Packet
Inspection ) |
| DoS / DDoS Protection |
| IP Address Anti-spoofing |
| E-Mail Alert and Logging
via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 100 VPN Tunnels |
| Protocol : PPTP, IPSec
, L2TP , L2TP over IPSec |
| Encryption : MPPE and
Hardware-Based AES / DES / 3DES |
| Authentication : Hardware-Based
MD5 , SHA-1 |
| IKE Authentication : Pre-shared
Key and Digital Signature ( X.509 ) |
| LAN-to-LAN , Teleworker-to-LAN |
| DHCP over IPSec |
| NAT-Traversal ( NAT-T
) |
| Dead Peer Detection (
DPD ) |
| VPN Pass-Through |
| Bandwidth Management |
QoS |
Class-based Bandwidth
Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for each
Direction ( Inbound / Outbound ) |
| Bandwidth Borrowed |
| Bandwidth / Session Limitation |
| Network Management
|
Web-Based User Interface
( HTTP / HTTPS ) |
| Quick Start Wizard |
| CLI ( Command Line Interface
) / Telnet / SSH *
|
| Administration Access Control |
| Configuration Backup /
Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP
/ FTP |
| Logging via Syslog |
| SNMP Management with MIB-II |
| Content Filter
|
URL Keyword Blocking (
White list and Black list ) |
| Java Applet , Cookies
, Active X , Compressed / Executable / Multimedia
File Blocking |
| Web Content Filter ( SurfControl
) |
| Time Schedule Control |
| Network Features
|
DHCP Client / Relay /
Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache / Proxy |
| UPnP |
| Port-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Temperature |
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% ( non-condensing
) |
| Max. Power |
18 Watt |
| Dimension |
L240.96 * W165.07 * H43.96
( mm ) |
| Power |
DC 15V |
|
*
Firmware Upgradeable |
The Vigor2930 is a Dual-WAN router with policy-based
load-balance, fail-over and BoD ( Bandwidth on Demand
) ; it also features advanced bandwidth control mechanisms
such as IP-layer QoS, NAT session limitation, bandwidth
borrowed, etc., to allow easy, flexible and reliable
access control and bandwidth management.
|
| Dual
WAN 應用 |
| It allows users to access Internet and
combine the bandwidth of the dual WAN to speed up
the transmission through the network. Each WAN port
can connect to different ISPs, Even if the ISPs use
different technology to provide telecommunication
service (such as DSL, Cable modem, etc.). If any connection
problem occurred on one of the ISP connections, all
the traffic will be guided and switched to the normal
communication port for proper operation. |
|
| Firewall
& VPN 應用 |
The SPI ( Stateful packet Inspection
) firewall uses object-based design to make settings
of firewall policies easy. The CSM ( Content Security
Management ) feature enables more precise and efficient
access control for IM ( Instant Messenger ) and P2P
( Peer to Peer ) applications. Furthermore, functions
such as DoS / DDoS ( Denial of Service / Distributed
DoS ) and URL / Web content filtering minimize security
threats both inside and outside the network.
With hardware-based implementation of the VPN protocols,
the Vigor2930 supports up to 100 VPN tunnels in compliance
with advanced protocols such as IPSec / PPTP / L2TP
/ L2TP over IPSec with AES / DES / 3DES for encryption
and MD5 / SHA-1 for authentication. |
|
|
|